(LS) Kingston 8GB (1x8GB) DDR3L SODIMM 1600MHz 1.35V / 1.5V Dual Voltage ValueRAM Single Stick Notebook Memory

EDEC standard 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) Power Supply VDDQ = 1.35V (1.28V ~ 1.45V) and 1.5V (1.425V ~ 1.575V) 800MHz fCK for 1600Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address “000' only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C Asynchronous Reset PCB: Height 1.18' (30mm), double sided component

If you feel your product has failed a Consumer Guarantee (as defined by Australian Consumer Law) then you can:

• Return it to your local MRMS Solutions Group store to initiate an inspection / service call.
• If it is a downloadable product (software or e-Gift Card) please Contact Us at MRMS Solutions Group.
• For flooring products: Returns are accepted for change of mind or oversupply quantities in the follow circumstances. (Excludes floor, wall and feature tiles)
  • in full pack quantity only
  • in original packaging
  • undamaged/unopened
• Please Note: Customer Direct products cannot be returned at MRMS Solutions Group franchised stores. For all Customer Direct purchases, please Contact Us.