Save 2%
Sale!
From: $2,362.64 $1,948.18
Save 13%
Save 2%
Sale!
Save 1%
Sale!
From: $5,379.96 $4,761.53
Save 1%
(LS) Kingston 16GB (1x16GB) DDR4 SODIMM 2666MHz CL19 1.2V Dual Ranked 2Rx8 ValueRAM Notebook Laptop Memory (>KVR32S22D8/16)
$179.00
4 in stock
Kingston 16GB (1x16GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Notebook Laptop Memory This document describes ValueRAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Dual-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18' (30.00mm) • RoHS Compliant and Halogen-Free
Weight | 0.02 g |
---|---|
Dimensions | 95 × 45 × 8 mm |
Warranty | |
Barcode |
If you feel your product has failed a Consumer Guarantee (as defined by Australian Consumer Law) then you can:
Kingston 16GB (1x16GB) DDR4 SODIMM 2666MHz CL19 1.2V Unbuffered ValueRAM Single Stick Notebook Laptop Memory
This document describes ValueRAM’s KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Dual-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18′ (30.00mm)
• RoHS Compliant and Halogen-Free
Weight | 0.02 g |
---|---|
Dimensions | 95 × 45 × 8 mm |
Warranty | |
Barcode |
"*" indicates required fields
"*" indicates required fields
Reviews
There are no reviews yet.