(LS) Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle

Sunix USB2312 USB 3.1 Enhanced SuperSpeed Dual ports PCI Express Host Card with Type-A Receptacle PCI Express Base Specification Revision 2.0 dual-lane (x2). Compliant with Universal Serial Bus 3.1 specification Gen2. Compliant with xHCI (eXtensible Host Controller Interface) specifications Revision 1.1. Supports simultaneous operation of multiple USB 3.1, 3.0, USB 2.0 and USB 1.1 devices. Supports USB data transfer rate of 10G/5G/480/12/1.5 Mbps. Expands dual external USB 3.1 Super-Speed plus Type-A ports on the system. USB port supplies maximum +5VDC / 900mA power output to USB device. Specifications Hardware BUS PCI Express Spec 2.0, Dual-Lane (x2) Controller PCI Express USB 3.1 Host controller, Asmedia ASM1142 USB Standard eXtensible Host Controller Interface (xHCI) Rev1.1 IRQ & IO Assigned by System USB Communication Interface Universal Serial Bus 3.1 / 3.0 / 2.0 / 1.1 Speed SuperSpeed+(10Gbps), SuperSpeed(5Gbps), High Speed (480Mbps), Full Speed (12Mbps), Low Speed (1.5Mbps) No. of Port 2-port PCB Connector USB 3.1 USB Type-A port Protection ±15KV IEC61000-4-2 Air Gap Discharge ±8KV IEC61000-4-2 Contact Discharge Power Source PCIe Bus Power Output Capacity USB Type-A Port: +5VDC / Maximum 0.9A / each port Note: Total power output capacity will be limited by system power supply. Over Current Protection USB Type-A Port: +6VDC / 1.1A / each port / PTC Fuse Power Consumption 1.1 W @ 3.3V (board only without power output to USB device) Driver Support Windows Windows 7 (X86/X64) Windows 8.x / 10 (X86/X64) (Windows in-box driver) Linux Linux 2.6.31 or later (Linux OS already implemented USB 3.0 driver) Environment Operation Temperature 0 to 60°C (32 to 140°F) Operation Humidity 5 to 95% RH Storage Temperature -20 to 70°C (-4 to 158°F) Regulatory Approvals EMC CE, FCC, VCCI, BSMI Green RoHS, CRoHS, WEEE Physical Characteristics PCB Dimension 79.3 x 68.5 mm Bracket Standard 120 mm (Low Profile 80mm) Bracket Space 1

If you feel your product has failed a Consumer Guarantee (as defined by Australian Consumer Law) then you can:

• Return it to your local MRMS Solutions Group store to initiate an inspection / service call.
• If it is a downloadable product (software or e-Gift Card) please Contact Us at MRMS Solutions Group.
• For flooring products: Returns are accepted for change of mind or oversupply quantities in the follow circumstances. (Excludes floor, wall and feature tiles)
  • in full pack quantity only
  • in original packaging
  • undamaged/unopened
• Please Note: Customer Direct products cannot be returned at MRMS Solutions Group franchised stores. For all Customer Direct purchases, please Contact Us.