Cisco PoE Injector – 120 V AC, 230 V AC Input – 55 V DC, 2 A Output – 60 W – Pole/Wall-mountable

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, and sending both to the connected access point.

The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable.

The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG.

The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter.

A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, and another shielded, outdoor cable carries power and data to the access point's Ethernet port. The power injector's AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal and vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements.

• Plant AU01
• Vendor Name CISCO
• Product Family CISCO Communications Phone Accessories
• Material Change Code NEW
• Action Code NEW
• Company Code Currency AUD
• Customer Currency Code AUD
• Creation Reason Type STANDARD
• Creation Reason Value STANDARD
• Retail Price With Tax 2322.09
• Ingram Part Number 3444125
• Eanupc Code 882658905315
• Vendor Number 0000500033
• Volume 6118.0000
• Unit EA
• Category Id 002307
• Dimension Unit CM
• Weight Unit KG
• Volume Unit CCM
• Material Code N
• Material Language Code EN
• Manufacturer Vendor Number 0000500033
• Sub Category 035
• Purchasing Vendor 0000101260
• Price Status N
• Vendor Subrange 457034
• Case Qty 0006
• Pallet Qty 0144
• Fulfilment Type S
• Customer Price With Tax 945.81
• Tax Percent 10.00
• Company Code 2210

If you feel your product has failed a Consumer Guarantee (as defined by Australian Consumer Law) then you can:

• Return it to your local MRMS Solutions Group store to initiate an inspection / service call.
• If it is a downloadable product (software or e-Gift Card) please Contact Us at MRMS Solutions Group.
• For flooring products: Returns are accepted for change of mind or oversupply quantities in the follow circumstances. (Excludes floor, wall and feature tiles)
  • in full pack quantity only
  • in original packaging
  • undamaged/unopened
• Please Note: Customer Direct products cannot be returned at MRMS Solutions Group franchised stores. For all Customer Direct purchases, please Contact Us.