Save 2%
Sale!
From: $2,362.64 $1,948.18
Save 13%
Save 2%
Sale!
Save 1%
Sale!
From: $5,379.96 $4,761.53
Save 1%
SURFACE PRO 8, 9, X SIGNATURE KEYBOARD TYPE COVER, WITH SLIM PEN 2 - BLACK (2022) × 1
MICROSOFT EDUCATION SURFACE PRO 9, 13" WIFI i7/16GB/512GB GRAPHITE, W10P × 1
(LS) Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 1.2V 1Rx8 Unbuffered ValueRAM Notebook Laptop Memory
$79.60
0 in stock
Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 SDRAM 1Rx8 non-ECC 22-22-22 1.2V ValueRAM PC4-3200 Memory module DRAM This document describes ValueRAM's KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows: Features: • Power Supply: VDD = 1.2V Typical • VDDQ = 1.2V Typical • VPP = 2.5V Typical • VDDSPD = 2.2V to 3.6V • Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals • Low-power auto self refresh (LPASR) • Data bus inversion (DBI) for data bus • On-die VREFDQ generation and calibration • Single-rank • On-board I2 serial presence-detect (SPD) EEPROM • 16 internal banks; 4 groups of 4 banks each • Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS) • Selectable BC4 or BL8 on-the-fly (OTF) • Fly-by topology • Terminated control command and address bus • PCB: Height 1.18' (30.00mm) • RoHS Compliant and Halogen-Free
Weight | 0.03 g |
---|---|
Dimensions | 68 × 42 × 8 mm |
Warranty | |
Barcode |
If you feel your product has failed a Consumer Guarantee (as defined by Australian Consumer Law) then you can:
Kingston 8GB (1x8GB) DDR4 SODIMM 3200MHz CL22 SDRAM 1Rx8 non-ECC 22-22-22 1.2V ValueRAM PC4-3200 Memory module DRAM
This document describes ValueRAM’s KVR32S22S8/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
Features:
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP = 2.5V Typical
• VDDSPD = 2.2V to 3.6V
• Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• Single-rank
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Fly-by topology
• Terminated control command and address bus
• PCB: Height 1.18′ (30.00mm)
• RoHS Compliant and Halogen-Free
Weight | 0.03 g |
---|---|
Dimensions | 68 × 42 × 8 mm |
Warranty | |
Barcode |
"*" indicates required fields
"*" indicates required fields
Reviews
There are no reviews yet.